The BLASTER™ is completely automatic! Just put your filter on, turn the water on, and it does the rest. It takes just a few minutes to clean most filters. A cleaner filter cartridge in less time and better water quality too!!!
Available in 3 sizes to accommodate most filter cartridges. The Blaster 1000 holds cartridges up to 20", the Blaster 2000 holds cartridges up to 27" and the Blaster 3000 holds cartridges up to 34".
Specifications:
FILTER CLEANING RPM: 0.8 (10" diameter ), 1.1 (7" diameter ), 1.8 (5" diameter )
WATER FLOW RATES: 10 GPM (recommended) and 6 GPM (minimum)
DIMENSIONS: Blaster 1000: 24" x 12" x 6", Blaster 2000: 31" x 12" x 6" and Blaster 3000: 38" x 12" x 6"
WEIGHT: Blaster 1000: 4.0 lbs, Blaster 2000: 4.6 lbs and Blaster 3000: 5.2 lbs
No installation required!!! Simply attach to a garden hose, to begin the rotating cleaning action.
Suggested Retail Price: $129 to $169
Manufacturer's Website: www.neoterics.com
Editor's Note: After cleaning my 150 sq. ft filter the old fashioned way (garden hose) and getting soaking wet and still not getting all the dirt and dog hair out of the pleats, I knew there had to be a better way. I found and purchased a Blaster 3000 from www.poolsupplyworld.com and it is wonderful. I use the Blaster to pre-rinseand then I soak the cartridge in some Filter Cleaner (not included) overnight. The cartridge goes back in the Blaster 3000 to rinse completely in about 30 minutes. No more dog hair and a really clean filter. The Blaster will more than pay for itself by extending the life of my cartridge filters. I highly recommend it!